The Anderson Mechanical Difference: Built on Experience, Driven by Quality

Keeping chillers running efficiently isn’t just about fixing a unit when it breaks. It’s about installing the right system for the environment, maintaining it regularly, and troubleshooting with accuracy when performance starts to slip. At Anderson Mechanical, we service both air-cooled and water-cooled chillers for commercial and industrial clients in the Kansas City area, and the difference precision makes can be massive. Here’s what you should know if your facility relies on a chiller system: Common Chiller Issues We See Reduced cooling capacity – Often caused by scale buildup or refrigerant issues Strange noises or vibrations – Could mean mechanical wear or compressor problems Energy spikes – Usually a sign the system is working harder than it should Water flow problems – Blockages or pump issues are frequent culprits When these signs appear, having the right diagnostics and a skilled team makes all the difference. We’ve seen buildings lose thousands of dollars in downtime from misdiagnosed chiller problems that could have been resolved faster with the right tools and experience. Why Precision Matters During Installation Chillers need to be sized specifically for your building’s cooling load. Too small, and it overworks itself. Too large, and you waste energy and money. Proper placement is critical. Air-cooled chillers require ventilation planning. Water-cooled systems need professional piping layout and pump calibration. Integration with existing controls, pumps, and towers is where things often go wrong. We’ve fixed installations done by others that missed key steps in setup. Our team focuses on getting every detail right from the start, including custom piping and prefab assemblies where needed to reduce install time and errors on-site. What to Expect from Regular Chiller Maintenance Coil cleaning and inspection Leak checks and refrigerant level testing Pump and motor alignment Electrical testing and control calibration Flow rate checks and tower performance (for water-cooled units) Scheduling this kind of service even once or twice a year can prevent most major issues from ever happening. Industries We Support We’ve worked on chillers for: Plastics and manufacturing Food-grade production facilities Property managers and commercial buildings Educational institutions We’ve also handled system upgrades and repair support for Trane, Ingersoll Rand, and others. Need Help with Your Chiller? Whether you’re installing a new system or trying to extend the life of your current one, let’s talk. Use the form on the site or call us directly. We’ll assess your current setup and recommend what’s best for your facility. No guesswork, no upsells, just a straightforward plan to get your system running right.

If you're responsible for a building that relies on a boiler system, whether it's a steam or hot water setup, staying on top of regular maintenance is one of the most important things you can do. At Anderson Mechanical, we work on commercial and industrial boilers throughout the Kansas City area, and we see what happens when maintenance gets pushed off for too long. The truth is, boilers don't just fail overnight. It usually starts with small signs that go unnoticed—longer warm-up times, uneven heating, or a spike in your energy bills. These are all indicators that your system may not be operating as efficiently as it should. When we come in for routine maintenance, we’re not just checking off a list. We’re inspecting critical components like burners, pressure controls, safety valves, and piping to make sure everything is functioning the way it’s supposed to. For steam boilers, this includes things like checking blowdown valves and ensuring water levels are within the right range. For hot water systems, we look at pumps, flow rates, and system pressure to keep everything balanced. One of the biggest benefits of preventative maintenance is catching small problems before they turn into expensive breakdowns. A leaking valve or a clogged heat exchanger might seem minor, but left unattended, they can cause your system to work harder, use more energy, and eventually shut down when you least expect it. We’ve helped a lot of facilities avoid that kind of disruption by setting up regular service schedules. Whether you're running a school, warehouse, or any large commercial building, downtime can be costly. The best way to avoid it is by making sure your boiler system is getting checked and cleaned on a regular basis. Beyond just avoiding emergencies, a well-maintained boiler lasts longer. If your system is already 10 or 15 years old, routine service can help you squeeze a few more good years out of it. And when it's time to replace, we can help you plan the transition with minimal impact to your daily operations. We also get a lot of questions about whether it's better to repair or replace. That really depends on the condition of your current system. After a proper inspection, we can give you a clear recommendation based on your setup and goals. If your boiler is still solid, it probably just needs a tune-up. If not, we can walk you through replacement options that fit your needs. If you haven’t had your system inspected in the past year, now is the time. Boiler performance tends to drop off before winter, and it’s always easier (and cheaper) to fix something during a routine service than during an emergency call. Need boiler service in Kansas City or nearby? Use the form on our site or give us a call to schedule an inspection. We’ll make sure your boiler is operating safely, efficiently, and ready for the seasons ahead.

When it comes to managing the heating and cooling needs of a large commercial building, efficiency and flexibility are key. That’s why I recommend considering a Variable Refrigerant Flow (VRF) system. At Anderson Mechanical, we install and service both Mitsubishi and Daikin VRF systems. These setups are especially helpful in buildings where you need customized comfort in different zones and better control over energy use. If you're new to VRF technology, here's the simple version. A VRF system allows for multiple indoor units to connect to one outdoor unit. This setup gives you the ability to heat or cool specific areas independently without wasting energy on unoccupied spaces. That’s a major step up from traditional HVAC systems that often run at full blast across an entire building even if only a few rooms are being used. Let’s say you manage a multi-level office building or a facility with separate departments. One section might need cooling while another still needs heating. With a VRF system, you can handle both at the same time using heat recovery technology. Mitsubishi and Daikin both offer this feature, and we’re trained and experienced in installing and maintaining systems from each brand. One of the things I like about VRF systems is their modular design. If you ever expand your facility or renovate a section of your building, you can add indoor units without replacing the entire system. That makes it a smart investment for growing businesses or property managers planning for the long term. In terms of energy savings, VRF systems are designed to run only as much as needed. The compressors adjust their speed to match the demand instead of switching on and off like older systems. This reduces wear and tear, cuts down on energy use, and usually results in a lower utility bill. Maintenance is also simpler than many expect. With regular service checks, these systems can run reliably for years. We offer ongoing service and repair options for both Mitsubishi and Daikin systems. If you're already running one of these units and need diagnostics or routine care, we’ve got the tools and experience to keep it performing at its best. I’ve seen firsthand how installing a VRF system improves comfort, reduces operational costs, and cuts down on complaints from tenants or employees. It’s a solid choice for schools, office buildings, and industrial facilities here in the Kansas City area. If you're thinking about upgrading or want to see if a VRF system makes sense for your property, reach out to us. We’ll walk you through the options and help you decide whether Daikin or Mitsubishi is the better fit based on your layout, goals, and budget. Need help planning or servicing your VRF system? Contact us today through the form on the site or give us a call. We're here to help you make the right decision for your building and keep your systems running the way they should.

Strategic HVAC Retrofitting: Maximizing Performance and Cost Savings for Kansas City Commercial Facilities

Advanced Sanitary Food Process Piping Solutions for Kansas City Food Processing Facilities

The Essential Guide to Preventive Maintenance for Commercial HVAC and Mechanical Systems 

Why VRF Systems Are a Smart Investment for Kansas City Businesses 

The Importance of Sanitary Food Process Piping in Commercial Facilities

When to Upgrade Your Building’s Boiler or Chiller System: Signs It’s Time